ID-AL EventPlayer mkII EP220 User Manual page 12

ID-AL - EventPlayer mkII - Audio and DMX player - User manual
4 - Operating mode
Compatibles files:
.MP3: audio files MP3 format ( see appendix B)
.WAV: audio filesWav format ( see appendix B)
The file and folders names define the playback mode. The files and folders must be stored and copied
according to a specific organisation described below.
4.1 Organisation of the folders:
Only ONE folder level is allowed at the root. The folder names are composed of 3 digits (000 to 999)
followed by optional parameters and the name of your choice.
You should not use special or accentuated characters
.
Example :
001
003 [J002]
034 folder name
247 [V+02] [SEQ] my folder
The folder number identifies the folder to use at the power on
of the player, during a jump or an input triggering. You can
use any number between 000 & 999.
The first three digits represent the folder number and
l
therefore its main name
Folders are numbered from 000 to 999.
Example :
000 : Folder N°000 - «Autoplay» folder which is automatically played when the device is powered on.
001 : Folder N° 1
034 : Folder N° 34
The folder number is used to define the playback order, it identifies the folder to use during a jump or an
input triggering. You can use any number between 000 & 999.
IMPORTANT : The 4 input contacts allow the triggering of the folders numbers corresponding to these 3
digits, as per a binary order from 001 to 015. It is possible to modify the numbers of the triggered folders
by editing file config.txt. (See chapter 5).
Folder 001- > Input 1
Folder 002 - >Input 2
Folder 003- > Input 1+2
Folder 004- > Input 3
Folder 005- > Input 1+3
Folder 006- > Input 2+3
Folder 007- > Input 1+2+3
Folder 008 - >Input 4
Folder 009 - >Input 1+4
Folder 010 - >Input 2+4
Folder 011 - >Input 1+2+4
Folder 012 - >Input 3+4
Folder 013 - >Input 1+3+4
Folder 014 - >Input 2+3+4
Folder 015 - >Input 1+2+3+4
® Waves System V 1.0 - 2018
- 10 -