ID-AL EventPlayer mkII EP220 User Manual page 35

ID-AL - EventPlayer mkII - Audio and DMX player - User manual
The page is composed of 4 parts:
A - Status of the player
This block displays the status of the player
as well as the directory name and name of
the file being read.
B - Status and operation of the output
contacts
The cases indicates the current status of the
output contacts. Simply click on the case that
you wish to enable and click on «Validate».
C - Volume level control
The fields on the left indicate the current
volume level of the player. To modify, select
a value from the field and click «Validate»
D - Commands
You can control the player by clicking on the
commands or entering a folder value.
The «config» menu allows setting of
parameters of the player. You can modify
the date and time as well as the various
user accounts and passwords for Ethernet
access.
Enter the information you wish to modify and
click on «Validate».
If you have lost the account names and
passwords, you must make a «Reset
Factory» to initialise the player and revert
to factory settings.
The «WEB access» parameters define the
access modes to the html interface which is
the one you see when you use a browser.
The «FTP access» parameters define the
access modes to the FTP interface which
you will use to update content of the memory
cards or USB sticks. (See chapter below)
The last page «About us» displays ID-AL
contacts.
- 33 -
® Waves System V 1.0 - 2018