Ethernet Link - ID-AL EventPlayer mkII EP220 User Manual

ID-AL - EventPlayer mkII - Audio and DMX player - User manual

10 - Ethernet link

Via the Ethernet link, the EventPlayer communicates to update content via FTP (SD card, stick or USB
HDD) and to receive commands in html Web server and check status of the player or outputs.
You can use the player in a local network. An adequately configured Modem/Router will allow remote
control of the player via the Internet.
Caution! Network administration requires good computer skills.
In a local network installation, the player requires an IP address. This address is set in the Option menu
(see option menu chapter). The player is then recognised on the network as a Web Server with «Internet
Explorer» or «Firefox» browsers and as a FTP server with a FTP software such as Filezilla.
In an installation where only the player is present or in a local network with external access, you must use
a Modem/Router to create a gateway between the player and the Internet.
Since the Modem/Router is configured with an IP gateway, you must declare this gateway to the EventPlayer
so that it can communicate (configured in the Option menu).
Note: The EventPlayer does not offer DHCP mode.
10.1 - HTML Web server
Open your Web browser on your computer (for example Firefox) and enter the IP address of the player
(the IP address is configured in the Option menu of the player). The home page should be displayed and
you should be requested to enter your account and password.
Default value:
Account (user): idalweb
Password: idalweb
You will be able to modify account name and password in the configuration page.
Enter the requested information and validate to get access to the main page.
- 32 -
® Waves System V 1.0 - 2018