ID-AL EventPlayer mkII EP220 User Manual page 16

ID-AL - EventPlayer mkII - Audio and DMX player - User manual
// example file
#001: 05 A1 FF E4 // comment in the line
#005: 45 85 63 21 78 A5 B2
#100: 98 75 35 45 98 // my command
//other command
#064: 48 25 Ce 8b
#128: 4C 8E D9 5A //
#999: a4 Fc 48 3e 8B
// comments at the end of the file
An example to allow the triggering of the reading of the folder 001 of another MicroPlayer mkII.
#001: 80 01 01
Example of tag:
001[RS001]: Sending of the bytes of the line #001 of the file «serial.txt» on reading of the folder 001
002[RS064]: Sending of the bytes of the line #064 of the file «serial.txt» on reading of the folder 064
Note: If a folder is played in a loop, the RS232 message defined with the [RSxxx] tag will be send at each
loop of the folder.
Example:
001[J001][RS099]: Playback the folder 001 in a loop. At each loop-back of the folder, the message described
at line 099 of the file «serial.txt» will be send on the player's RS232.
[WHL]
- Play the folder during all the time that the corresponding inputs is activated
l
This tag allows you to play the contents of a folder as long as the corresponding input is activated. When
the input associated with the folder is released, the player applies the output tags added to the folder name.
As long as the corresponding input is activated, the folder is played in a loop.
Example:
001[WHL]: The folder 001 is played in a loop while the input 1 is activated. When the input 1 is released,
the player STOP.
002[WHL][J045]: The folder 002 is played in a loop while the input 2 is activated. When the input 2 is
released, the player plays the folder 045.
003[WHL][J999]: The folder 003 is played in a loop while the inputs 1+2 are activated. When the inputs
1+2 are released, the player plays the folder 999.
The player's dry contact inputs may be associated, it means that any changes in the mix of inputs will be
managed at any time by the player.
Example:
000[J000]: The folder 000 is played in a loop when the player is powered on.
001[WHL][J000]: The folder 001 is played in a loop while the input 1 is activated. If the input 2 is activated
in addition to the input 1, the player plays the folder 003.
002[WHL][J000]: The folder 002 is played in a loop while the input 2 is activated. If the input 1 is activated
in addition to the input 2, the player plays the folder 003.
003[WHL][J000]: The folder 003 is played in a loop while the inputs 1+2 are activated. If the input 1 is
released, the player plays the folder 002. But, if the input 2 is released, the player plays the folder 001.
® Waves System V 1.0 - 2018
- 14 -