Annexe B : Infrared Remote Control - ID-AL EventPlayer mkII EP220 User Manual

ID-AL - EventPlayer mkII - Audio and DMX player - User manual
Audio Amplifier
Speaker output:
• 2 × 8 W - 8 , THD+N = 1 %, 1 kHz
Ω
• 2 × 10 W - 8 Ω , THD+N = 10 %, 1 kHz
• 2 × 15 W - 4 Ω , THD+N = 1 %, 1 kHz
• 2 × 19 W - 4 Ω , THD+N = 10 %, 1 kHz
Miscellaneous
• Player power supply input: 12V DC - 3A
• Timekeeping when the player is not powered: up to 2 months
• Operating ambient temperature: from 0 to +60 °C
• Storage temperature: from -20 to +60 °C
• Width: 143 mm - 1/3 of 19'' rack
• Height: 44mm - 1U
• Depth (with terminal block): 208mm
• Weight: 543 g (with terminal block)
Accessories
• Rack support 19''- 1U
• Sensors and push buttons
Annexe B - Infrared remote control
An infrared sensor is fitted in the front of the EventPlayer to control the main functions.
With this remote control you can:
Transport command: Play / Stop / Next / Previous
Volume command: Change volume up/down
Trigger key: Same function than buttons 1 and 2 in front of the player. (configurable button)
® Waves System
Bouton 1
Stop
Précédent
Bouton 2
Volume +
Lecture
- 37 -
Suivant
Volume -
V 1.0 - 2018