Installation Guidelines - Elation PLATINUM BEAM 5R EXTREME User Manual

I N S T A L L A T I O N G U I D E L I N E S
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical
and construction codes and regulations.
Before rigging/mounting the fixture to any metal truss/structure or placing the fixture on any
surface, a professional equipment installer MUST be consulted to determine if the metal
truss/structure or surface is properly certified to safely hold the combined weight of the
fixture, clamps, cables, and accessories.
Fixture ambient operating temperature range is 14° to 113°F. (-10° to 45°C)
Do not use the fixture under or above this temperature.
Fixture should be installed in areas outside walking paths, seating areas, or away from
areas were unauthorized personnel might reach the fixture by hand.
NEVER stand directly below the fixture when rigging, removing or servicing.
Overhead fixture installation must always be secured with a secondary safety attachment,
such as an appropriately rated safety cable.
Allow approximately 15 minutes for the fixture to cool down before serving.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 feet (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q ua l i fi e d e l e c tr i ci a n s h o ul d b e u s ed f or a l l
el ec tr i c al c o n n ec t i o n s a n d/ or i n s t a l l at i o n s .
MINIMUM DISTANCE TO OBJECTS/SURFACES
MUST BE 27 FEET (8 METERS)
MAXIMUM TEMPERATURE OF EXTERNAL
SURFACE 212° F (100°C)
19