Elation PLATINUM BEAM 5R EXTREME User Manual page 32

Hide thumbs Also See for PLATINUM BEAM 5R EXTREME:

Table of Contents

WDMX INTERNAL WIRELESS DMX RECEIVER SET UP

CLEARING EWDMX TRANSMITTER LINK

•! Access the "Wireless DMX" sub menu from the "PERSONALITY" menu, and then

select "Clear WDMX Memo" to clear any existing link between the fixture and a

EWDMX Transmitter. The Wireless indictor on the fixture will turn solid

link is severed.

•! You may also clear the link directly from the EWDMX Transmitter. First, be sure the

fixture(s) is powered ON, and then hold down the configuration button on the EWDMX

Transmitter for as least 5 seconds. This will automatically clear the link between the

EWDMX Transmitter and any fixture that is powered ON. All EWDMX indictors will

glow solid

RED

FIXTURE WIRELESS INDICATOR

RED/GREEN

not receiving a DMX signal from a controller.

GREEN

(Solid) = Paired with an EWDMX Transmitter and receiving

DMX data.

RED

(Solid) = Not paired with an EWDMX Transmitter (FREE).

if the procedure was successful.

(Rapid Flashing) = Syncing to an EWDMX Transmitter.

(Slow Flashing) = Paired with an EWDMX Transmitter but

RED

when the

Table of Contents