Elation PLATINUM BEAM 5R EXTREME User Manual page 27

Hide thumbs Also See for PLATINUM BEAM 5R EXTREME:

Table of Contents

EFFECT ADJUST – Calibration

ONLY QUALIFIED TECHNICIANS SHO ULD PERFORM THI S FUNCTION.

This function allows small adjustments to be made to the effect wheels (Color, Gobo,

Shutter, etc.) to compensate for ware or in the event a sensor has been knocked slightly out

of place. Because improper use of this function can result in undesired operation this

function has been password protected. The password is 050 and must be entered each

time the calibration menu function is entered. Because calibration is an extremely delicate

procedure, instructions on performing this action are left out of this manual. For a first time

calibrator, please contact our customer support team for step-by-step instructions.

USER MODE SET – User Mode

Select operating mode, which includes DMX Channel and User defined modes.

USER MODE SET – Edit User Mode

Create user defined channel orders allowing the fixture to match the channel order of other

fixtures on the market for easier operation. A total of three user modes may be configured:

User Mode A, User Mode B, and User Mode C.

EDIT PROGRAM – Select Program

Select one of the (10) user defined internal Auto Programs.

EDIT PROGRAM – Edit Program

Edit any of the (10) user defined internal Auto Programs.

EDIT PROGRAM – Edit Scenes

Edit any of the scenes of the internal Auto Programs.

EDIT PROGRAM – Record Controller

The fixture features an integrated DMX-recorder by which you can transmit the

programmed scenes from your DMX-controller to the moving head. Adjust the desired

scene numbers via the encoder (from – to). When you call up the scenes at your controller,

they will automatically be transmitted to the moving head.

Table of Contents