SATO CL608VA Operator And Technical Reference Manual page 105

Special Notes
OA Font
OB Font
SATO CL Series Printers
1. Characters may be enlarged through the use of the Character
Expansion command (see Page 4-23).
2. Character spacing may be altered through the use of the Character
Pitch command (see Page 4-26). The default is 2 dots between
characters. It is recommended to use a spacing of 5 dots for
OCR-A and 1 dot for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T
Custom-Designed Characters command (Page 4-21).
4. A font must be defined for each field to be printed. There is no
default font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and
OB on the SATO M-8400 printer.
6. The proportionally spaced fonts XU, XS, XM, XL and XA can be
printed with fixed spacing using the <ESC>PR Fixed Space
command.
7. The matrices for the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B
specifications when printed on different resolution printers.
CL408
15 dots W x 22 dots H
20 dots W x 24 dots H
9001035 Rev. E
Section 4. Programming Reference
CL608 CL412
22 dots W x 33 dots H
30 dots W x 36 dots H
CL612
Page 4-35