Table of Contents
Advertisement
Quick Links
Tubular motor:
GEIGER PRO.TECline
Motor control:
PRO.TECline Radio (GB45R-../..)
for rolling shutters, awnings and screens
Original-Montage- und
DE
Betriebsanleitung
Original assembly and
EN
operating instructions
Notice originale de montage
FR
et d'utilisation
Instrucciones originales de
ES
instalación y funcionamiento
Istruzioni originali di
IT
installazione e funzionamento
www.geiger.de
EN
1
EN
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GEIGER GB45R Series
Summary of Contents for GEIGER GB45R Series
- Page 1 Tubular motor: GEIGER PRO.TECline Motor control: PRO.TECline Radio (GB45R-../..) for rolling shutters, awnings and screens Original-Montage- und Betriebsanleitung Original assembly and operating instructions Notice originale de montage et d’utilisation Instrucciones originales de instalación y funcionamiento Istruzioni originali di installazione e funzionamento...
-
Page 2: Table Of Contents
1. General information Dear customer, By purchasing a GEIGER motor you have decided on a quality product from GEIGER. Thank you very much for your decision and the confidence placed in us. Before you put this drive into operation please observe the following safety instructions. -
Page 3: Guarantee
GB 45 Speed Torque in Nm Motor control Motor diameter GEIGER PRO.TECline 4. Safety instructions ATTENTION: Important safety instructions. For personal safety, it is important to follow these instructions. Please keep these instructions for future reference. f Do not allow children to play with stationary controls. Keep remote controls away from children. -
Page 4: Safety Instructions For Assembly
If the mains connection cable of this unit is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person in order to avoid any danger. f The device must be mounted as described in the installation instructions. Fixations shall not be made with adhesives since they are regarded as unreliable. Gerhard Geiger GmbH & Co. KG | 100W2573 V000 1222... -
Page 5: Installation Instructions
– Place the motor into the existing engine bearer and lock – Place the motor in a compatible engine bearer with clip system and lock with spring or rotating lever The GEIGER PRO.TECline motor is suitable for shaft diameters from 50 mm! www.geiger.de... -
Page 6: Information For The Specialist Electrician
The drive clicks. 2. Press the PAIR key on the new hand-held transmitter for at least 2 seconds. The drive clicks, the new hand-held transmitter has been programmed. Gerhard Geiger GmbH & Co. KG | 100W2573 V000 1222... -
Page 7: Further Functions
4. Press the UP key on the master hand-held transmitter (B). As soon as the LED on the new hand-held transmitter (A) turns darker, the copying of the UP key is finished and you can release both keys. Repeat the process with the STOP and DOWN keys. www.geiger.de... -
Page 8: Setting Of The End Positions
The setting of the end positions for installation situations A and B is described below. In situations C and D, the assignment of the setting screws changes. To turn the setting screws, use a 4mm hexagon key or the included adjustment aid. Gerhard Geiger GmbH & Co. KG | 100W2573 V000 1222... - Page 9 If the lower end position is overrun (the motor switches off too late): • Press the UP key until the hanging is above the selected end position. • Turn the setting screw a few turns in MINUS direction and repeat the procedure described above again. www.geiger.de...
-
Page 10: What To Do If
Teach-in a new hand-held transmitter as described in chapter „Further functions > Replacing a lost hand-held transmitter“ and, if necessary, reset the drive to the delivery status. Gerhard Geiger GmbH & Co. KG | 100W2573 V000 1222... -
Page 11: Declaration Of Conformity
Gerhard Geiger GmbH & Co. KG Schleifmühle 6 | D-74321 Bietigheim-Bissingen Phone +49 (0) 7142 9380 | Fax +49 (0) 7142 938 230 | info@geiger.de | www.geiger.de Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRA 300591 | USt-IdNr. DE145002146 Komplementär: Geiger Verwaltungs-GmbH | Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRB 300481 Geschäftsführer: Roland Kraus | WEEE-Reg.-Nr. -
Page 12: Technical Data
The average sound pressure level data are intended for guidance only. The values were determined by GEIGER at a distance of 1 m, with a hanging motor at idle speed and averaged over 10 seconds. There is no reference to any specific test standard.
Need help?
Do you have a question about the GB45R Series and is the answer not in the manual?
Questions and answers