Network Settings - Sanyo VCC-N6695P Instruction Manual

Network Settings

1 Network Settings
Set the TCP/IP settings in accordance with the operating system of the computer
being used.
☞
The screens below explain the procedure when using Windows Vista.
If using Windows XP, click [Start] → [Control Panel] → [Network & Internet Connections], and
then click [Network Connections], and then proceed to step 3.
1
Click [Start] → [Control Panel] →
[Network and Sharing Center], and then
click [Network Connections].
2
Click [Manage Network Connections].
3
Right-click the icon for the LAN card
(Ethernet adapter) you are using, and
then select "Properties" from the menu.
☞
If accessing the camera via UPnP
(Universal Plug and Play), check the
electronic manual on the included
CD-ROM.
4
In "This connection uses the following
items", select "Internet Protocol Version
4 (TCP/IPv4)", and then click Properties.
• For Windows XP, select "Internet protocol
(TCP/IP)".
5
Select "Use the following IP address",
and then enter the IP address, subnet
mask and gateway.
If the camera's IP address is the
default address (192.168.0.2), enter
"192.168.0.xxx". For "xxx", enter a value
which does not overlap with the value for
any other computer or network device on
the network, or which is not within the range
of IP addresses assigned by DHCP server.
6
Check the setting details, and then click
the OK button.
12