Network Settings - Sanyo VDC-DP9575P Manual For Remote Operation

NETWORK SETTINGS

1 TITLE
Specifies the camera title.
The title specified here appears in the main screen
and is inserted into the alarm notification e-mail.
The title can be up to 16 alphanumeric characters.
2 IP ADDRESS
Select the method for configuring the camera IP
address.
Manually configure the IP address.
FIX
→ Enter the IP address.
DHCP Automatically allocates the IP address.
3 SUBNET MASK
When the [IP ADDRESS] setting is "FIX", enter the
subnet mask.
4 GATEWAY
When the [IP ADDRESS] setting is "FIX", enter the
gateway.
5 MAC ADDRESS
The MAC address of the camera is displayed
automatically.
6 DNS
When the [IP ADDRESS] setting is "DHCP", select
the method for configuring the DNS server address.
Manually configure the DNS server
FIX address.
→ Enter the DNS server address.
Automatically allocates the DNS server
DHCP
address.
7 DNS SERVER ADDRESS
When the [DNS] setting is "FIX", enter the DNS
server address.
English
1
2
3
4
5
6
7
8
9
F
G
H
8 SSL
Select "ON" when you want to use the SSL
encryption for the video signal.
9 PORT NUMBER
The default value depends on the preferences
specified in the [SSL] setting above.
SSL (OFF) 80
SSL (ON) 443
You can assign a value between 1 and 65535 to the
SSL port number.
Note:
Set the port number in the range of "1 – 65535" but
make sure that it doesn't overlap with the [AUDIO
PORT NUMBER] on the [AUDIO SETTINGS]
screen.
F PASSWORD
Specify the login password according to each user
name (guest/admin).
MEMO:
When you enter a blank "guest" password (no
password is specified), the authentication process
for accessing the camera will be omitted.
G NETWORK SPEED
Select the data transfer speed in consideration of
the network environment.
H [SET] button
After completing the settings, click this button to
confirm the settings.
To reflect the settings, use the [Close] button to
terminate the camera connection, and then access
the camera again.
13
("admin" only)