Image Level Selection (Direct Operation); Image Level Selection (Menu Operation) - Sanyo PLV-Z1BL Owner's Manual

Image Level Selection (Direct Operation)

Select the image level among Standard, Cinema, Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the remote
control. (See the next section "Image Level Selection (Menu
Operation)" about each item.)
1 Press the MENU button, and the main menu appears. Select
the Image Level Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
2 Choose the level that you want to set with the POINT UP/DOWN
button, and then press the SELECT button to activate it.
Standard
Normal picture adjustment preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
User preset picture adjustment in Image Level Adjustment menu (p28,
29).

Image Level Selection (Menu Operation)

Image Level Selection
menu
IMAGE button
Standard
Cinema
INPUT
Image 1
VIDEO
AUTO
Image 2
VIDEO
Image 3
S-VIDEO
COMPONENT
Image 4
COMPO
IMAGE 1-4 button
Image Level Selection menu
The level being selected.
Close the Image Level Selection menu.
Video Input
IMAGE button
IMAGE
IMAGE
NO SHOW
1
2
KEYSTONE
3
4
27