Moving The Projector - Sanyo PLV-Z1BL Owner's Manual

When moving the projector, close the front cover and retract the adjustable feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it into a suitable case.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
G Do not drop or bump a projector, otherwise damages or malfunctions may result.
G When carrying a projector, use a suitable carrying case.
G Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best
way.
NOTE
Moving the projector from a cool temperature location to a warm temperature location may result in moisture condensation
on the Projection lens. In such an event, leave the projector OFF and wait until condensation disappears.
Installing the Projector in a Proper Position
Install the projector in a proper position. Installation of improper position may reduce the lamp lifetime and cause fire hazard.
20˚
20˚
NO UPWARD
NO DOWNWARD
NO SIDEWAY

Moving the Projector

Do not tilt the projector more than 20 degrees on either side.
Do not put the projector upward and project an image.
Do not put the projector downward and project an image.
Do not put the projector sideway and project an image.
Safety Instructions
5