Installation; Positioning The Projector; Tilting The Projector - Sanyo PLV-Z1BL Owner's Manual

Sanyo multimedia projector model plv-z1, plv-z1bl owner's manual
Hide thumbs Also See for PLV-Z1BL:
Table of Contents

Advertisement

Installation

G This projector is designed to project on a flat projection surface.
G The projector can be focused from 3.6'(1.1m) ~ 19.7'(6.0m).
G Refer to the figure below to adjust a screen size.
*The lens is at the top of the lens shift.
Screen Size
(W x H) mm
Zoom (min)
Zoom (max)
Picture tilt and projection angle can be adjusted by rotating the
Adjustable feet. Projection angle can be adjusted up to 11.8
degrees with the Adjustable feet.
1
Lift the front of the projector and pull the Feet lock latches on
both sides of the projector.
2
Release the Feet lock latches to lock the Adjustable feet and
rotate the Adjustable feet to adjust position and tilt.
3
To retract the Adjustable feet, lift the front of the projector
and pull and undo the Feet lock latches.
Keystone distortion of a projected image can be adjusted by
menu operation or the remote control. (Refer to page 21 and
42.)
CAUTION
Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. Refer to page
5.

Positioning the Projector

14.8' (4.5m)
9.8' (3.0m)
3.9'(1.2m)
40"
31"
30"
40"
663 x 373
884 x 497
3.6'(1.1m)
4.6' (1.4m)
3.9' (1.2m)
–––––

Tilting the Projector

ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
19.7'(6.0m)
150"
100"
125"
83"
100"
150"
2209 x 1244
3314 x 1866
11.8' (3.6m)
17.7' (5.4m)
9.8' (3.0m)
14.8' (4.5m)
ADJUSTABLE FEET
200"
Max. Zoom
169"
Min. Zoom
H
200"
4419 x 2489
–––––
19.7'(6.0m)
FEET LOCK
LATCH
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plv-z1

Table of Contents