Terminal - Sanyo PLV-Z1BL Owner's Manual

Terminal

COMPUTER INPUT
TERMINAL
Connect the computer
output to this jack.
(Refer to page 18.)
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to page
17.)
* This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to
be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use
the RESET function excessively.
*
VIDEO INPUT JACK
(VIDEO)
Connect the composite
video output from video
equipment to VIDEO jack.
(Refer to page 17.)
Part Names and Functions
SERVICE PORT JACK
This jack is used to service
this projector.
COMPONENT VIDEO INPUT JACK
( Y-Pb/Cb-Pr/Cr )
Connect the component video
outputs to Y, Pb/Cb, and Pr/Cr
jacks.
(Refer to page 17.)
11