General Safety Warnings; Air Tool Warnings - ATD Tools ATD-5200 Owner's Manual

General Safety Warnings:

WARNING:
The instru ons and warnings contained in this manual should be read and understood
before using or
manual and have developed a thorough understanding of how this tool works. Failure to observe any of the
following instruc ons could result in severe personal injury to tool user and bystanders, or cause damage to
the tool and property. Keep this manual for future reference.
Note:
The warnings and cau ons discussed in this instru on manual cannot cover all possible
co and situa ons that may occur. It must be understood by the operator that common sense and
are factors which cannot be built into this product, but must be supplied by the operator.
WARNING:
Use safety equipment. User and bystanders should use safety goggles or safety glasses
with side shields which comply with current na onal standards, or when needed, a face shield. Use an
ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
This applies to all persons in the work area. Also use non skid safety shoes, hardhat, gloves, dust
collec systems, and hearing protec on when appropriate.
WARNING:
Keep bystanders and children out of the work area while opera ng this tool.
WARNING:
Always keep your work area clean, unclu ered, and well lit. Clu ered or dark areas invite
accidents and injuries. DO NOT work on oor surfaces that are slippery.
WARNING:
Do not operate this tool if you are red or under the in ence of alcohol, drugs, or
medica ons that could a ect your ability to use the tool properly.
WARNING:
Dress properly. Do not wear loose clothing or jewelery as they can be caught in moving parts.
Wear restri ve hair covering to contain long hair.
WARNING:
Do not reach over or across running machines. Keep proper foo ng and balance at all mes.
Non skid footwear is recommended when working.
Air Tool
WARNING:
Air under pressure can cause severe injury. Never point an air tool at anyone or direct
air at yourself or others. It could cause serious injury.
WARNING:
Always turn
the air supply before installing, removing or adjus ng any accessory on this tool, or before performing any
maintenance on this tool. Failure to do so could result in injury.
WARNING:
Always check for damaged, frayed or loose hoses and
damaged parts replaced immediately by qual
this tool. Do not allow anyone to use or operate this tool un l they have read this
Warnings:
the air supply, drain the hose of air pressure and detach the tool from
personnel.
ngs. Have any defec ve or