Subscribe to Our Youtube Channel
Related Manuals for ATD Tools Atd-7404
Summary of Contents for ATD Tools Atd-7404
- Page 1 Hydraulic Clutch Jack Operating Instructions & Parts Manual Model Number Capacity Atd-7404 500 Lb. Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China ATD7404-M0 05/07...
-
Page 2: Product Description
(a load dropped suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by an Atd Tools authorized service center. It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals are available from manufacturer. -
Page 3: Before Use
Removing a Clutch 1. Verify that the product and the application are 1. Select the correct size spline sleeve. Place the compatible, if in doubt call Atd Tools Technical spline on the adapter shaft, then attach the assembly Service (636)327-9050. - Page 4 OPERATING with Optional Flywheel Adapter Note. Flywheel Adapter Assembly is not included with the unit. To order, refer to replacement parts section. Adapter Shaft Install the flywheel adapter 1. Keep jack in lowest position. Remove the release pin, then remove the spline sleeve and adapter shaft. Flywheel Adapter 2.
-
Page 5: Maintenance
• Ensure release valve tightly closed • Release valve not tightly closed pressure • Remedy overload condition • Overload condition • Contact Atd Tools Tech. Service • Hydraulic unit malfunction Jack will not lower after • Reservoir overfilled • Ensure load is removed, then drain unloading fluid to proper level... -
Page 6: Replacement Parts
Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, part number and description below. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385. Tel:(636)327-9050 Fax:(636)327-9044... - Page 7 Replacement Parts List for Model Atd7404 Item Part No. Description Qty. Item Part No. Description Qty. Top nut Lift Arm Axle 5905-00100-100 Filler Plug 5701-00006-000 Grease Fitting Reservoir Lift Arm Piston Rod Snap Ring Ram Bearing Lift Arm Axle Cylinder Bolt Screw Spline Adapter Seat...
-
Page 8: One Year Limited Warranty
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.
Need help?
Do you have a question about the Atd-7404 and is the answer not in the manual?
Questions and answers