Table of Contents
Advertisement
Routing Video Inputs
Use the Routing page to switch the video inputs to the outputs.
To switch an input to an output:
1. In the Navigation pane, click
2. Click Video. The Video tab appears:
3. Click an Output button (Output 1 or Output 2).
The selected Output button turns blue.
The green dot indicates that an acceptor is connected to the output.
4. Click the Input button to switch to the selected Output. The selected Input button turns
blue. That input is switched to the output.
The green dot indicates that a source is connected to the input.
You can:
•
Click
on an output button to mute the video output.
•
Click
/
•
Click
on an input button to configure remote device buttons, see
Devices
on page 19.
VS-622DT – Using the Web Pages
Figure 15: Routing Page – Video Tab
on an input button to disable/enable HDCP support.
. The Routing page appears.
Kramer Electronics Ltd.
Setting Remote
18
Advertisement
Table of Contents
