Technical Specifications Figures F igure 1: VS-21H-IR 2x1 HDMI Switcher F igure 2: Connecting a VS-21H-IR 2x1 HDMI Switcher Tables T able 1: VS-21H-IR 2x1 HDMI Switcher (Top Side Panel) Features T able 2: Technical Specifications of the VS-21H-IR 2x1 HDMI...
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 High-Definition Multimedia Interface 3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Page 4
Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Overview Overview The VS-21H-IR is a high quality switcher for HDMI signals that accepts two HDMI inputs—letting you select either HDMI input using a switch located on the panel—and routes the selected HDMI input signal to the HDMI output. In particular, the VS-21H-IR: •...
(often associated with low quality cables) • Avoid interference from neighboring electrical appliances and position your VS-21H-IR away from moisture, excessive sunlight and dust KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Your VS-21H-IR 2x1 HDMI Switcher Figure 1 Table 1 define the VS-21H-IR 2x1 HDMI Switcher: Figure 1: VS-21H-IR 2x1 HDMI Switcher Table 1: VS-21H-IR 2x1 HDMI Switcher (Top Side Panel) Features Feature Function 12V DC +12V DC connector for powering the unit...
IN 2 is selected. Figure 2: Connecting a VS-21H-IR 2x1 HDMI Switcher 1 Switch OFF the power on each device before connecting it to your VS-21H-IR. After connecting your VS-21H-IR, switch on its power and then switch on the power on each device 2 Or press key 1 or 2 on the remote transmitter, once setup (see section 5.1)
You can use the remote control transmitter to switch INPUT 1 or 2 to the output. Before doing so, set it to work with the VS-21H-IR by assigning a GROUP number. To assign the GROUP number on the remote control transmitter, do the following: 1.
IN 2 LEDs light 4. When a certain input—INPUT 1 or INPUT 2—is selected the EDID information comes directly from the display. When the input is not selected, the VS-21H-IR uses the virtual EDID stored in the non-volatile memory. 6.1.2...
Technical Specifications Technical Specifications Table 2 includes the technical specifications of the VS-21H-IR: Table 2: Technical Specifications of the VS-21H-IR 2x1 HDMI INPUTS: 2 HDMI Connectors OUTPUT: HDMI Connector BANDWIDTH: Supports up to 2.25Gbps bandwidth per channel COMPLIANCE WITH HDMI STANDARD: Supports HDMI 1.3 and HDCP...
Page 12
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 13
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VS-21H-IR and is the answer not in the manual?
Questions and answers