Orientation - Magtek DynaWave Installation And Operation Manual

3 - Mechanical Integration
3.3

Orientation

The device is designed only to be oriented with the LEDs on top and facing the cardholder, as shown in
Figure 3-2. The Contactless Indicator mark on the face of the device is a trademark of EMVCo, LLC,
and may convey additional requirements to the solution design. See EMVCo usage guidelines.
Figure 3-2 - DynaWave Mounting Orientations
The device must be installed such that cardholders have an unobstructed path to tap cards or contactless
devices (such as smartphones).
The device does not incorporate drain holes, so there are no additional requirements for installation pitch
angle to facilitate drainage.
DynaWave| OEM Contactless NFC Module | Installation and Operation Manual
Page 24 of 39 (D998200265-10)