Mechanical Integration; About Mechanical Integration - Magtek DynaWave Installation And Operation Manual

3 - Mechanical Integration

3 Mechanical Integration
3.1

About Mechanical Integration

This document describes how to use DynaWave effectively, safely, and securely. Not
following the guidelines in this section could damage the device, render it inoperable,
and/or violate the conditions of the warranty.
This section provides information and guidelines for designing the mechanical aspects of a solution that
incorporates DynaWave. MagTek strongly recommends vetting and testing solution designs before
finalizing and deploying them, to make sure the design meets all requirements (e.g., functional, legal,
security, certification, safety, and so on).
When designing the mechanical portions of a solution that incorporates DynaWave, consider the
following:

Review section 1.5 About DynaWave Components for an overall introduction to the device's
physical features and what they are called.

Review Appendix A Technical Specifications.

See section 3.2 Dimensions and section 3.3 Orientation for overall device dimensions and
requirements on mounted orientation.

If the solution includes an enclosure, design the enclosure front panel. Information about fitting the
device into a panel cutout are in section 3.4 Enclosure Design.

Determine how the device will be mounted. See section 3.5 Mounting for details. Coordinate with
the electrical design team to make sure the enclosure design, mounting hardware, and solution-
specific installation instructions meet electrical requirements.

Coordinate with the electrical design team to plan cable routing and fastening. See section 3.6
Cabling for details.

Consider additional factors that do not fit these categories. See section 3.7 Miscellaneous
Considerations.

Review safe handling practices in section 1.8 Handling to make sure the logistical aspects of the
solution design meet the device's handling requirements.

Review recommended installation practices in section 4 Installation. The steps provided in that
section depend on the solution design team to customize the steps or fill in solution-specific details
before distribution to installation technicians or production line personnel.

Review section 6 Maintenance. When installed in the solution-specific enclosure, the maintenance
procedures may require modifications, or the solution may require additional maintenance not
covered in the general guidelines provided here.

Review any additional requirements from other agencies, such as PCI certification requirements,
building codes, and so on, which may introduce additional constraints to the design.
DynaWave| OEM Contactless NFC Module | Installation and Operation Manual
Page 22 of 39 (D998200265-10)