Firmware Update Using An Operating System-Specific Dup; Firmware Update Using Windows Dup; Firmware Update Using Linux Dup; Firmware Update Using Uefi Shell - Dell EMC Boot Optimized Server Storage-S1 User Manual

• BOSS-S1 CLI
• iDRAC
• Lifecycle Controller
Firmware update using an operating system-specific
DUP
Download the latest operating system Dell Update Package (DUP) from SAS-RAID_Firmware_xxxxx_xxxx_xxx.exe for Windows and
SAS-RAID_Firmware_xxxxx _xxxx_xxx.bin for Linux from Dell.com/support and install it for monolithic servers.
Download the latest modular operating system DUP from SAS-RAID_Firmware_xxxxx_xxxx_xxx.exe for Windows and SAS-
RAID_Firmware_xxxxx _xxxx_xxx.bin for Linux from Dell.com/support and install it.

Firmware update using Windows DUP

Perform the following steps to update using Windows:
NOTE: Ensure that you have Administrator privileges for Windows.
1 Download the latest Dell Update Package (DUP) for Windows from the Dell.com/support.
2 Double-click the EXE file and click Install.
After the inventory collection and firmware validation processes are complete, the installed version and package version are displayed.
Installed version refers to the current firmware version of the controller, and package version refers to the DUP
NOTE:
version.
3 Click Yes to continue.
4 Click Yes.
5 Verify the installed firmware version in HII or using BOSS-S1 CLI.

Firmware update using Linux DUP

Perform the following steps to update using Linux:
NOTE: Ensure that you have Root/Sudo privileges for Linux/ESXi.
1 Download the latest Dell Update Package (DUP) for Linux from the Dell.com/support.
2 Go to the downloaded file path and provide the permissions to execute the DUP file.
3 Execute the BIN file ./SAS-RAID_Firmware_xxxxx_xxxx_xxx.bin.
4 When prompted, press Q to proceed.
After the inventory collection and firmware validation processes are complete, the installed version and package version are displayed.
5 To continue press Y+Enter or N+Enter to cancel.
6 Press Y+Enter when prompted.
7 Verify the installed firmware version in HII, iDRAC or BOSS-S1 CLI.

Firmware update using UEFI Shell

Perform the following steps to update your firmware using UEFI Shell:
1 Download the SAS-RAID_Firmware_xxxxx_UEFI_Axx.zip from Dell.com/support and unzip the file.
2 Copy the files onto a UEFI bootable USB drive and map it to the system.
3 Reboot the system from the USB drive, and go to UEFI.
Overview 9