Wall Mount To Tabletop Installation - Geemarc COMBI DECT 295 Photo User Manual

2.5.2

Wall Mount to Tabletop Installation

1. Unplug the pow er adapter from the pow er outlet. Unplug the telephone line
cord from the w all jack (or DSL filter). If the telephone line cord and pow er
adapter cord are bundled, untie them first. Push the telephone base up to
remove it from w all.
2. Put the corded handset aside. Hold dow n the switch hook on the telephone
base, and then slide the handset tab upw ards to remove it from the slot.
Rotate the handset tab by 180 degrees. Then, replace the handset tab into the
slot until it locks into position.
3. Gently pull upw ard to release the w all mount bracket. Rotate the w all mount
bracket up to tabletop position and push it into the telephone base until it clicks
into place.
4. Plug the telephone line cord (or DSL filter) into the w all jack. Plug the power
adapter into an pow er outlet. Bundle the telephone line cord and pow er
adapter cord neatly w ith twist ties if necessary.
1
3
2
4
6