Wall Mount To Tabletop Installation - Geemarc CL595 User Manual

2.5.2

Wall Mount to Tabletop Installation

1. Unplug the power adapter from the power outlet. Unplug the telephone line cord from the
wall jack (or DSL filter). If the telephone line cord and power adapter cord are bundled,
untie them first. Push the telephone base up to remove it from wall.
2. Put the corded handset aside. Hold down the switch hook on the telephone base, and then
slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180
degrees. Then, replace the handset tab into the slot until it locks into position.
3. Gently pull upward to release the wall mount bracket. Rotate the wall mount bracket up to
tabletop position and push it into the telephone base until it clicks into place.
4. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into an
power outlet. Bundle the telephone line cord and power adapter cord neatly with twist ties if
necessary.
1
3
2
4
5