Store A Redial Number Into The Phonebook; Delete A Redial Number; Delete The Entire Redial List; Find The Handset - Geemarc COMBI DECT 295 Photo User Manual

4.9.2 Store a Redial Num ber into the Phonebook
Using the base:
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press MENU/OK to select ADD TO PB?
3. Press MENU/OK to enter the name.
4. Press MENU/OK to edit the number.
5. Press MENU/OK and /
6. Press MENU/OK to save the redial number into the phonebook.
4.9.3 Delete a Redial Num ber
Using the base:
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press MENU/OK and /
3. Press MENU/OK to confirm.
4. Press MENU/OK to reconfirm. Delete the Entire Redial List
4.9.4

Delete the entire Redial list

Using the base:
1. Follow Steps 1 and 2 in section 4.9.1
2. Press MENU/OK and /
3. Press MENU/OK to confirm.
4. Press MENU/OK to reconfirm.
4.10

Find the Handset

This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below .
1. In idle mode, press MENU/OK and
2. Press MENU/OK to confirm. "PAGING" w ill flash on the base screen.
All the handsets registered to the base w ill produce the paging tone, and "PAGING" w ill
flash on the screen. You can stop the paging by pressing
CANCEL/MUTE on any handset or INT/MUTE/CLEAR on the base to stop paging.
NOTE:
If there is an incoming call during paging, the phone w ill ring w ith the incoming call
instead of paging.
to select the melody.
to select DELETE?
to select DELETE ALL?
/ to select PAGE ALL HS.
21
/ / /