Delete A Personalized Ogm (Set Ogm To Default); Set The Answer Delay; Set The Recording Time Of Incoming Message - Geemarc COMBI DECT 295 Photo User Manual

9.5.5

Delete a Personalized OGM (SET OGM to DEFAULT)

Using the base:
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
4. Press MENU/OK and /
5. Press MENU/OK and /
6. Press MENU/OK and enter the 4-digit system PIN (default PIN is 0000).
7. Press MENU/OK to confirm.
9.5.6 Set the Answ er Delay
You can set the number of rings before the answ ering machine answ ers and starts
playing your OGM. You can set the answ ering machine to answ er after two to eight
rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new
message has been registered - then the answ ering machine sw itches to answering
after approximately 2 signals. This is useful w hen using remote access; if you call up
the answ ering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using the base:
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
4. Scroll MENU/OK and
5. Press MENU/OK to confirm
9.5.7 Set the Recording Tim e of Incom ing Message
You can set the maximum length of the recording time of the incoming
messages.
Using the base:
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
4. Press MENU/OK and /
5. Press MENU/OK to confirm
to select ANS. MACHINE.
to select TAM SETTINGS.
to select OGM SETTING.
to select ANS & REC or ANSWER ONLY.
to select DEFAULT.
to select ANS. MACHINE.
to select TAM SETTINGS.
to select ANSWER DELAY.
/ to select the desired answ er delay.
to select ANS. MACHINE.
to select TAM SETTINGS.
to select RECORD TIME.
to select your desired recording time.
41