Limitation Of Liability; Copyright - CNC-Step T-Rex Series Operating Instructions Manual

Warning of hazardous electrical voltage
This sign stands for activities on all components carrying live voltage.
Danger due to hot surface
This sign stands for activities involving contact with hot objects.
1 .2 L i mi t a t i o n o f L i a b i l i t y
All data and notes in these instructions were prepared with consideration to the statutory standards
and regulations, the present state of technology, as well as our many years of knowledge and
experience.
Under the following circumstances the manufacturer will not assume any liability:
• Non-compliance with these instructions
• Used other than for the intended purpose
• Unauthorized or unapproved personnel
• Unauthorised rebuilds or modifications
• Unauthorized technical changes
• The use of unauthorized replacement parts or non-original accessories
The actual scope of delivery can, by special designs, deviate from the explanations and
presentations given here, because of the utilization of additional order options, or because of the
most recent technical changes.
The responsibilities agreed in the delivery contract, the General Terms and Conditions as well as the
delivery conditions of the manufacturer and the statutory regulations valued at the time of
conclusion of the contract are effective.
1 .3 C o p y r i g h t
The contents of this instruction are copyrighted. It is to be used for the purpose of operating the
machine, only. Any other use without a written permission is forbidden.
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating Instructions
T-Rex-Series
31.03.2014
Page 8