Safety Installations - CNC-Step T-Rex Series Operating Instructions Manual

Safety glasses
Safety glasses prevent injuries in eyes from parts flying around or squirts of fluids.
Protective gloves
Protective gloves protect the hands from rubbing, abrasions, cuts or more profound
injuries, as well as when touching hot surfaces.
Protective cover
Wear protective cove to protect long hair from being caught, wrapped up in, or drawn
into moving parts.
Employees are required to wear protective covers, if their hair is longer than the extent
of the shaft and its moving parts.
Safety boots
Safety shoes protect the wearer's feet against falling objects, from being crushed,
slippery surfaces and being run over by vehicles.
2 .6 S a f e t y i n s t a l l a t i o n s
WARNING:
Malfunctioning safety installations may pose a fatal risk!!
Malfunctioning or deactivated safety installations may cause severe injuries and
even death!
• Before starting to work, check all safety installations regarding their
• Never deactivate or bypass safety equipment.
• Take care to ensure that safety installations are always accessible.
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
functional efficiency and correct installation.
Operating Instructions
T-Rex-Series
Page 19
31.03.2014