Description - Savaria Orion Owner's Manual

6

2. DESCRIPTION

Cab Operating Panel (COP) Buttons (Figure 1-A)
The Cab Operating Panel (COP) buttons facilitate the
UP/DOWN movement of the cab between landings.
Once the selected landing button is pressed, the cab
will automatically move to the landing. The cab will
stop when the selected landing is reached.
Door Open/Close Buttons (Figure 1-B)
The elevator door will close automatically after a
preset adjustable time in seconds. These buttons can
be pressed to open/close the door when the cab is at
a landing.
Alarm Button (Figure 1-C)
This button can be pressed at any time to sound the
alarm in case of an emergency.
Emergency Stop Button (Figure 1-D)
Press the Emergency STOP button at any time to
stop the cab and activate the alarm buzzer.
Phase 2 Fire Service Keyswitch (Optional)
A
The keyswitch in the ON position enables cab
controls as per Code B44 2.27. The keyswitch in the
B
OFF position allows for normal lift operation. The
D
C
keyswitch in the HOLD position holds the doors
open when the cab is at a landing.
Figure 1
Call Cancel Button (Optional)
Keyed COP
Used with Fire Service; when pressed, this button
cancels all registered calls. The cab will stop at the
next landing.
Emergency Light
The COP emergency light remains ON in the event of a main power failure. The
emergency light uses a Battery Back-Up system with an automatic recharger.
Handrail
A single handrail is mounted to the Cab Operating Panel (COP) side of the cab
below the COP.
Orion Owner's Manual Part No. 000586, 18-m09-2018