Starting Or Restarting A Log; Starting And Restarting A Log - GE PM880 User Manual

5.3 Starting or Restarting a Log

The Start and Start All Logs commands enable you to restart a paused log
or start a pending log.
Note:
You cannot restart a log that is completed or ended using the End
command.
Use the following steps to start or restart one or more logs:
5.3.0a Accessing the Log Manager
If the menu is not active, press
1.
Use the arrow key to scroll to Logging and press
2.
Use the arrow key to scroll to Log Manager and press
3.
5.3.0b Selecting a Log File
Use the arrow key to scroll to the desired log.
1.
Note:
The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
Press
[MENU]
2.
Use the arrow key to scroll to Log and press
3.
Use the arrow key to scroll to Start or Start All Logs and press
4.
.
[ENTER]
The PM880 returns to the Log Manager, which displays the selected log as
Running or Pending.
Next, do one of the following:
•
To start or restart another log, repeat the above steps.
•
To return to taking measurements, press
.
[MENU]
Model PM880 Portable Hygrometer User's Manual
.
.
[MENU]
[ENTER]
[F3]
Chapter 5. Logging Data
.
[ENTER]
[ENTER]
.
(Exit) and then press
.
83