GE PM880 User Manual page 25

1.4.2a Entering Probe ID
If the menu is not active, press
1.
Use the arrow key to scroll to Program and press
2.
Use the arrow key to scroll to Calibrate and press
3.
Use the arrow keys to scroll to the Probe ID tab and press
4.
screen similar to Figure 4 appears.
Use the arrow keys to scroll to S/N and press
5.
Use the numeric keys to enter the serial number from the Calibration
6.
Data Sheet and press
hex nut of the moisture probe.
Use the arrow keys to scroll to the suffix box and press
7.
the drop-down list.
Use the arrow keys to scroll to the desired suffix and press
8.
Press (OK) to exit.
[F3]
9.
Model PM880 Portable Hygrometer User's Manual
[MENU]
Figure 4: Probe ID Window
. The serial number also appears on the
[ENTER]
Chapter 1. Getting Started
.
[ENTER]
[ENTER]
[ENTER]
.
.
. A
[ENTER]
.
to open
[ENTER]
[ENTER] .
11