Adding A Message To A Site File; Accessing The Site Manager; Selecting A Site File; Entering A Site Message - GE PM880 User Manual

4.4 Adding a Message to a Site File

The Site Manager has a command that enables you to enter a message or
description for each site file (up to 30 characters). The Site Manager
displays the site message with the other file information. Use the following
steps to add a site message:

4.4.1 Accessing the Site Manager

If the menu is not active, press
1.
Use the arrow key to scroll to Site and press
2.
Use the arrow key to scroll to Site Manager and press
3.

4.4.2 Selecting a Site File

Use the arrow key to scroll to the desired site.
1.
Note:
The list of site files in the Site Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
Press
[MENU]
2.
Use the arrow key to scroll to Site and press
3.
Use the arrow key to scroll to Message and press
4.

4.4.3 Entering a Site Message

Press (Delete) to delete any unwanted letters or numbers. Use the
[F1]
1.
arrow keys to scroll to the desired letter or number and press
To change case or use special characters, press
character pages.
Repeat this procedure until you have created the desired site message.
2.
When you have finished, press
3.
New site information is displayed when the site is selected in Site Manager.
Press (Exit).
[F3]
4.
Model PM880 Portable Hygrometer User's Manual
.
Chapter 4. Using Special Features
[MENU] .
[ENTER]
[ENTER]
(OK).
[F3]
.
[ENTER]
.
.
[ENTER]
[ENTER]
to change the
[SEL]
.
.
49