Selecting A Measurement To Log - GE PM880 User Manual

5.1.2 Selecting a Measurement to Log

Use the [] key to step to a box and press
1.
Figure 37 appears.
Use the arrow keys to scroll to the desired measurement type and press
2.
.
[SEL]
Use the arrow keys to scroll to the desired units and press
3.
Repeat steps 1 through 3 for up to 12 different parameters.
4.
When you have finished, press
5.
will begin at the specified date and time.
Note:
If you created the log from within the Log Manager, the meter
returns to the Log Manager, press
.
[MENU]
The PM880 returns to taking measurements. A Pencil icon appears in the
bottom right-hand side of the screen.
Model PM880 Portable Hygrometer User's Manual
Figure 37: Select Measurement Window
[ENTER]
(Activate) to start the log. The log
[F3]
(Exit) and then press
[F3]
Chapter 5. Logging Data
. A screen similar to
(OK).
[F3]
81