Table of Contents
Advertisement
7 MAINTENANCE
CAUTION!
Make sure that the cleaning procedure is done in a suitable prepared workspace.
CAUTION!
During cleaning, always wear recommended personal safety equipment, such as
ear plugs, safety glasses, masks, gloves and safety shoes.
1.
Disconnect the power source from the mains supply.
WARNING!
Wait at least 30 seconds for the capacitors to discharge before continuing.
2.
Remove the four screws holding the right side panel (R) and remove the panel.
3.
Clean the right side of the power source, using dry compressed air with reduced
pressure.
NOTE!
Since the power source contains one "dirty side" (the right side) and one
"clean side" (the left side), it is important that you do not remove the left
side panel before cleaning the right side of the power source.
0463 416 001
- 33 -
© ESAB AB 2017
Hide quick links:
Advertisement
Table of Contents
