Tools Needed To Install Your Hooded Fans, Technical Information - Chore-Time TURBO series Installation & Operator's Manual

Motor Specifications:
Blade:
Chore-Time Equipment strongly recommends that a good alarm system should be installed in confinement
buildings to warn of power failure and high temperature.
Chore-Time Equipment also recommends that an alternate power source be available for confinement buildings
in case of power failure.
14", 18", & 24" Hooded Fan Operator's Manual
Tools needed to install your
H oo d ed Fans i nc lu de :
1. Regular Screwdriver
2. Wire Cutters
3. Wire Strippers
4. Adequate Size and Quantity of Electrical Wire
5. Electrical Drill and Drill Bits
6. 5/16" Socket
7. Another person to help!!
T e ch n i cal I n f o r m a ti o n
Horsepower - - - - - - - - - - - - - 1/8 H.P.
Voltage - - - - - - - - - - - - - - - 230 V
Hz. - - - - - - - - - - - - - - - - - 60 Hz.
Phase - - - - - - - - - - - - - - - - Single Phase
R.P.M. - - - - - - - - - - - - - - - - 1625 R.P.M.
Size - - - - - - - - - - - - - - - - - 14" (356 mm)
Type - - - - - - - - - - - - - - - - - Cast Aluminum
• Page 4
14" Hooded
Fan
Important
18" Hooded 24" Hooded
Fan Fan
1/4 H.P. 1/3 H.P.
230 V 230 V
60 Hz. 60 Hz.
Single Phase Single Phase
1625 R.P.M. 1075 R.P.M.
18" (457 mm) 24" (610 mm)
Cast Aluminum Cast Aluminum