Advertisement
e. Browse to the
default in the following filepath:
c:\Program Files\ZiLOG\ZDSII_Z8Encore!_<version_number>\
samples\Z8FMC16\Z8FMC16_MotorDemo\src
f.
Select the
motordemo.zdsproj
screen opens (see Figure 4). To view the project source files, double-click the
Project Files
file to open the file in the ZDS II file editor.
Figure 4. Zilog Developer Studio II Opening Screen
The above figure is for reference only. You may have a newer version of
Note:
the software.
QS005406-0111
Z8FMC16100 Series Motor Control Development Kit
folder for the
Samples
folder on left side of the IDE interface. Double-click the individual
motordemo.zdsproj
file and click
. The initial ZDS II program
Open
Quick Start Guide
file, located by
Page 11 of 15
Advertisement
