AMX Enova DGX 100 Series Hardware Reference Manual page 285

FIG. 173
Update Driver Software - Unknown Device dialog
NOTE:
this driver software anyway option.
8.
If the AutoPatch USB Bridge port specifies the COM number, go to Step 11. If the port does not specify a COM
number, right-click the AutoPatch USB Bridge, select Properties, and complete all remaining steps (FIG. 174):
FIG. 174
Device Manager
9.
In the AutoPatch USB Bridge Properties dialog, select the General tab (FIG. 175):
FIG. 175
AutoPatch USB Bridge Properties dialog (General tab)
10. Make note of the COM port number assigned to the AutoPatch USB Bridge.
This port number must be entered when setting a connection in a software program or a terminal emulation
program. The PC will always associate a specific USB connector with the assigned virtual COM port. The PC will not
recognize the module if you disconnect and reconnect using a different COM port on the PC.
Enova Digital Media Switchers - Hardware Reference Manual
A Windows Security window may open and ask if you want to install a driver with an unverified publisher. Select the Install
COM port number (if not displayed, complete all remaining steps)
Assigned COM port number
Appendix G - External Serial Controllers
285