Adjusting Focus - Sanyo VDC-HD3500P Summary Manual

■

Adjusting focus

NEAR
FAR
Roughly focus the subject using NEAR/FAR buttons.
Make adjustment while watching the monitor.
Press the SET button.
The camera automatically focuses on the subject. Note that the color of the status
indicator "FOCUSING" turns from black to orange.
The status indicator
automatically come into focus.
In this case, manually adjust the focus. (
Press the NEAR/FAR button to adjust the focus.
Make adjustment so that the FA bar gauge
When the subject comes into focus, the color of the status indicator
"FOCUSING" changes from black to orange.
Pressing the buttons moves the FB bar gauge
The position changes step by step each time the button is pressed
and continuously at a high speed when the button is held down.
Press the SET button for 2 seconds or more.
The focus adjustment screen will close.
•
The focus adjustment screen will also close automatically if left idle
for 5 minutes or more.
•
VDC-HD3500P/HD3500/HD3300P/HD3300:
If video is out of focus in either color or black-and-white mode,
adjust the focus in respective modes.
SET
changes to "ERROR" when the subject cannot
Electronic manual)
indicates the highest level.
4
Lens Adjustment
.