Device Configuration - Omron CJ Series Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedures in this document are as
follows:
Personal computer
(CX-One and
Sysmac Studio
installed,
OS: Windows 7)
USB cable
Manufacturer
OMRON CJ2 CPU Unit
(Built-in EtherNet/IP port)
OMRON Power Supply Unit
OMRON Switching hub
- 24 VDC power supply
(for Switching hub)
OMRON CX-One
OMRON CX-Programmer
OMRON Network Configurator
- Personal computer (OS: Windows 7)
- USB cable
(USB 2.0 type B connector)
- LAN cable (STP (shielded,
twisted-pair) cable of Ethernet
category 5 or higher)
Coupler Unit
OMRON
Digital Input Unit (DC Input Unit)
OMRON
Digital Output Unit
OMRON
(Transistor Output Unit)
Analog Input Unit (Voltage Input Unit)
OMRON
Sysmac Studio
OMRON
- 24 VDC power supply
(Unit power supply)
- 24 VDC power supply
(I/O power supply)
5．Applicable Devices and Device Configuration
CJ2M-CPU32
(Built-in EtherNet/IP port)
24 VDC power supply
USB cable
24 VDC power supply
(Unit power supply)
24 VDC power supply
(I/O power supply)
Name
Slave Terminal
NX-EIC202＋
NX-ID4442＋
NX-OD3256＋
W4S1-05C
NX-AD2603
LAN cable
Model
CJ2M-CPU32
CJ1W-PA202
W4S1-05C
-
CXONE-AL[][]C-V4
/AL[][]D-V4
(Included in CX-One)
(Included in CX-One)
-
-
-
NX-EIC202
NX-ID4442
NX-OD3256
NX-AD2603
SYSMAC-SE2[][][]
-
-
Version
Ver.2.0
(Ver.2.12)
Ver.1.00
Ver.4.[][]
Ver.9.60
Ver.3.59a
Ver.1.0
Ver.1.0
Ver.1.0
Ver.1.0
Ver.1.15
6