Table of Contents
Advertisement
2
. Configuration
2.1 Using Promi-WIN™
TM
With Promi
-SD, Bluetooth wireless connections can be made to any Bluetooth
device supporting SPP (Serial Port Profile). Especially when using the SD as a
cable replacement, take advantage of the Promi
Once a pair of SDs is set for this feature, they automatically connect when powered
up. A pair of SD units, within their radio range, may be used as a virtual RS-232
cable.
To make wireless connections between two Bluetooth devices, one device should be
in Discoverable (INQUIRY SCAN) and Connectable (PAGE SCAN) as well. Most
Bluetooth devices are set to Discoverable and Connectable in manufacture.
However, to maximize internal battery life, SD INQUIRY SCAN and PAGE SCAN are
disabled.
To make SD respond to the INQUIRY and PAGE operations of other
Bluetooth devices, activate INQUIRY SCAN and PAGE SCAN.
Before making the first Bluetooth connection with SD units, be prepared with a pair of
SD units and also install the PromiWIN
TM
Promi
-SD product package.
2.1.1 Making the first Promi-SD
To make Bluetooth wireless connections with SD, first connect the SD to a host
computer running PromiWIN
SCAN and PAGE SCAN from PromiWIN
Let's suppose there are 2 Promi-SD™s, SD1 and SD2:
1.
Connect the SD1 to a host serial port and turn on the SD.
2.
Check the SD1 STATUS LED color. Amber indicates standard mode. Start the
PromiWIN
Start/Programs/PromiWIN
Promi-SD™ User Manual ver 1.0
www.initium.co.kr
TM
/Bluetooth connection
TM
as instructed below. Then activate SD INQUIRY
TM
configuration program by clicking the program icon under
TM
.
Model: Promi-SD202-OA
TM
-SD automatic connection feature.
TM
program on the CD enclosed in the
TM
.
12
Advertisement
Table of Contents
