Omron CJ Series Connection Manual page 34

Ethernet/ip coupler unit

Hide thumbs Also See for CJ Series:

Table of Contents

Precautions for Correct Use

Check that the LAN cables are connected before performing the following steps.

If they are not connected, turn OFF the each device, and then connect the LAN cables.

Select Select Interface - CJ2

USB/Serial Port from the

Option Menu.

Select Connect from the

Network Menu.

The Setup Interface Dialog Box

is displayed.

Check that the following settings

are made.

Port Type: USB

Port: OMR0

Baud Rate: 115200 Bit/s

Click OK.

The Select Connect Network

Port Dialog Box is displayed.

Select BackPlane -

CJ2M-EIP21 - TCP:2.

Click OK.

7．EtherNet/IP Connection Procedure

Table of Contents

Nx series