Required Tools/Equipment; Section 3. Equipment Location; Equipment Pad; Filter Location - Jandy SFTM22-1.5 Installation And Operation Manual

Top mount sand filter
Table of Contents

Advertisement

Jandy
Pro Series Sand Filter SFTM22-1.5, SFTM24-2.0
®

2.3 REQUIRED TOOLS/EQUIPMENT

The following list of equipment should be present and
available to the installer at the time of install. Failure to
Safety Eyewear
Gloves

SECTION 3. EQUIPMENT LOCATION

All pool water recirculation system components need
to be installed in accordance with the standards and
instructions in effect in your county or municipality.

3.1 EQUIPMENT PAD

The filter along with the other primary components
of your pool water recirculation system should be
installed on a level, prepared footing, which is capable
of supporting the weight of the filter (see Section 6)
and which will accommodate the use of anchoring bolts
to secure the equipment in place. Check local building
codes for any additional requirements. If possible the
equipment pad area should be:

3.2 FILTER LOCATION

On the equipment pad, the filter should be positioned so that it is:
• Level
• At least 6 inches away from walls and landscaping for servicing
• At least 5 feet away from any electrical controls or inputs.
|
Installation & Operation Manual
use the appropriate safety and installation equipment
could lead to personal injury or property damage.
Level
Screwdriver,
Phillips Head
Utmost care must be taken to ensure that the equipment
is located such that it is able to be safely operated and
maintained.
• Dry
• Well ventilated
• Supplied with sufficient drainage
• Out of direct sunlight
• Located away from eaves or overhangs where rain gutters are
not installed
• Away from overhanging trees or other foliage that may
produce waste or debris of any kind that could clog, block or
otherwise disrupt the regular operation and maintenance of
the equipment
• As close to the primary body of water as possible. Additional
pipe length reduces efficiency due to pipe friction
• In line with other equipment in order to
minimize turns in plumbing which can
result in diminished efficiency
• Stationary and not subject to movement
5 ft
5 ft
Align
Plumbing
Connections
6 in
6"
ENGLISH
Scoop
PVC Cutter
6 in
6 in
To Waste
Page 5
Channel Locks
PVC Pipe Adhesive

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sftm24-2.0

Table of Contents