Secabo TC5 SMART Operating Manual page 16

● In the released position, you can now access the connecting rod between the two gas
compression springs from behind, lift it slightly and vary the position within the
predetermined locking points.​ Caution! Danger of injury from trapping/crushing!
● Moving the contact point of the springs to the front lowers the closing force, while moving to
the rear increases it. Please note that sufficient force is required to ensure automatic
opening of the press - the opening force decreases or increases along with the closing
force.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com
16