Advertisement
Quick Links
OPERATING INSTRUCTIONS
for the heat press
Secabo TC D2
Congratulations on purchasing a Secabo heat press!
Please read these operating instructions carefully so you can start production with
your press without problems.
Reproduction of these operating instructions in any form requires the written
approval of Secabo GmbH. We reserve all rights to change technical data and
product features.
Secabo does not assume any liability for direct or indirect damage resulting from
use of this product.
Version 1.2 (22.02.2011)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Secabo TC D2
Summary of Contents for Secabo TC D2
- Page 1 Reproduction of these operating instructions in any form requires the written approval of Secabo GmbH. We reserve all rights to change technical data and product features. Secabo does not assume any liability for direct or indirect damage resulting from use of this product.
-
Page 2: Table Of Contents
Table of contents Table of contents Table of contents Table of contents 1 1 1 1 Safety Precautions Safety Precautions ........ Safety Precautions Safety Precautions ............................................................2 2 2 2 2 2 2 2 Scope of Delivery ........ -
Page 3: Safety Precautions
• Never open the housing or attempt to modify the machine yourself. • In case you are requested by the Secabo customer support to open the heating plate cover, please make sure you are wearing respiratory protection and only touch the contained insulation wool with gloves. Any disposal of the wool must be contained in a closed bag. -
Page 4: Scope Of Delivery
Scope of Delivery Before starting work, please check whether the following items are all present: Article Quantity Heat press 230V connecting cable Instruction manual... -
Page 5: Machine Description
Machine description a) Time and Temperature Controller b) Working table c) Pressure Adjustment d) Slide rail e) Knee lever Open/Close... -
Page 6: Controller
Controller Select settings Press briefly: increase value Press for longer: reset values “START“ Press button - heating process starts Press briefly: reduce “STOP“ value Press button again - heating process stops Press for longer: save values... - Page 7 Operation • Use the power cable included in the delivery to connect the transfer press with a 230V power socket. • Switch on the press with the flip switch on the back. • The small lamp next to “Current Temp“ is on, the current temperature is shown on the display.
-
Page 8: Maintenance And Cleaning
Maintenance and cleaning Maintenance work should always be accomplished with the press switched off and cooled down. The plug must first be disconnected from the power socket. Consult Technical Support before carrying out any maintenance work. Clean the press regularly with a soft cloth and mild household cleaner to remove adhesive residues etc. -
Page 9: Recommended Times And Temperatures
Recommended Times and Temperatures These values are only guidelines; they can vary from material to material and should always be checked before pressing. Material Material Temperature Temperature Pressure Pressure Time Time Material Material Temperature Temperature Pressure Pressure Time Time Flock film Flock film Flock film Flock film... -
Page 10: Technical Data
Technical data Heat press Heat press Heat press Heat press TC D2 Working angle Working angle Working angle Working angle 0° - 50° Max. contact pressure Max. contact pressure Max. contact pressure Max. contact pressure 250g/cm² Type Type Type Type Lineare double plate heat press 260°C... - Page 11 98/37/EC Directive on machinery (from 2009-12-29: 2006/42/EC) Norm / Standard: EN 60204-1:2006 Technische Dokumente bei / Technical documents at: Secabo GmbH, Hochstatt 6-8, 85283 Wolnzach, Germany Dipl. Ing. Fabian Franke Dipl. Ing.(FH) Bernhard Schmidt Secabo GmbH, www.secabo.com, Hochstatt 6-8, 85283 Wolnzach, Germany...
Need help?
Do you have a question about the TC D2 and is the answer not in the manual?
Questions and answers