Page 1
details excepted, all rights reserved. Secabo GmbH is not liable for any direct or indirect damages caused by the use of this product. Version 1.0 (08.02.2013) Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
If you cannot observe one or more of the safety precautions above, or if you are not sure whether all points are satisfied, please contact our Technical Support Department. Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
With a large digital controller, temperature (°C und °F) and pressing time can be adjusted. The green digits are showing the theoretical value, the white digits are showing the actual value. A Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Recommended times and temperatures These values are only guidelines;; they can vary from material to material and should always be checked before pressing. Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Page 5
in the cold state. If the adhesive does not stick in the cold state, it may have been pressed too cold or for too short a time. Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Weight 35kg 45kg Dimensions (W x H x D) 39cm x 50cm x 75cm 41cm x 50cm x 80cm Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Need help?
Do you have a question about the TC5 and is the answer not in the manual?
Questions and answers