Page 1
Any form of reproduction of these operating instructions requires the written permission of Secabo GmbH. Technical data and product features are subject to change and errors excepted. Secabo GmbH accepts no liability for direct or indirect damage resulting from the use of this product.
Page 2
● Never open the housing and do not make any changes to the unit yourself. ● Should it be necessary to open the heating plate cover after explicit request by Secabo customer service, it is recommended to wear respiratory protection and to handle the insulation wool inside with gloves.
Scope of delivery Mechanical base of the transfer press with heating element and base element Controller Box CL01 C13 cold appliance connection cable Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
IEC socket and earth connection Controller (not shown), internal connections e. Clamping lever for transfer objects Exchangeable base element g. Cover heating element and heating element h. Press lever Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Assembly and commissioning ● Place the base frame of the TCC Lite heat press securely on a stable table. ● Position the CL01 controller box above the rear centre of the TCC Lite transfer press base frame and slide the threaded bolts on the controller box into the slots on the base frame.
Page 6
Controller components and operation Digital controller Operation ● Connect the TCC Lite Transfer Press to the mains using the power cable supplied. ● Switch on the TCC Lite heat press. ● OFF" appears in the display. ● After switching on, "-f-" (Fahrenheit) or "-c-" (Celsius) appears.
The press should be cleaned regularly with a soft cloth and a mild household cleaner to remove adhesive residues, dust, etc. Do not use scouring pads, solvents or petrol! Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Important note: Before each production, own tests should be made with the respective transfer materials and carrier media. The above values and the manufacturer's specifications are only indicative. Washing resistance and behaviour during transfer must be determined in separate tests. Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Page 9
The hotmelt adhesive in the transfer material has only developed its adhesive strength when cold. If the adhesive does not adhere when cold, the pressing process may have been too cold or too short. Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Weight with 22kg packaging Dimensions closed 24 cm x 59 cm x 53 cm Dimensions open 24 cm x 71 cm x 53 cm (W x H x D) Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Page 11
98/37/EC Directive on machinery (from 2009-12-29: 2006/42/EC) Norm / Standard: EN 60204-1:2006 Technische Dokumente bei / Technical documents at: Secabo GmbH, Hochstatt 6-8, 85283 Wolnzach, Germany Dipl. Ing. Fabian Franke Dipl. Ing.(FH) Bernhard Schmidt Nepata Vertrieb GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com...
Need help?
Do you have a question about the TCC Lite and is the answer not in the manual?
Questions and answers