Secabo TC5 SMART Operating Manual page 13

○ The active Sleep Mode can be exited at any time by pressing any button or
by actuating the press lever. The press will then restore the previously set
parameters.
6. Auto Off
○ Setting the time interval in minutes, after which the press completely turns off
the heating.
○ To completely disable Auto Off Mode, set the time value to "0".
○ The active Auto Off Mode can be exited at any time by pressing any button
or by actuating the press lever. The press will then restore the previously set
parameters.
7. Language
○ Setting the menu language.
8. Unit
○ Configuring the temperature unit. Celsius or Fahrenheit are possible.
Resetting the counter:
Press the
Pair heat press with mobile device
● Press the
● Enable Bluetooth:
Use the wheel to scroll to the Bluetooth ON/OFF setting and press the wheel once. Now
turn the wheel again to set Bluetooth to ON and confirm again by pressing the wheel.
● Setting the Bluetooth PIN:
Use the wheel to scroll to the Bluetooth PIN setting and press the wheel once. Now turn the
wheel again to set the desired Bluetooth PIN and confirm again by pressing the wheel. The
default PIN is 255.
● Press the Settings button on the controller to exit the Settings menu
● Download the Secabo Smart Transfer App to your mobile phone and start it.
● The first time you start the app, you will receive a brief introduction that will help you
understand the features and benefits of the app.
● After the introduction, a dialog opens, which will assist you with connecting the press to the
app. The app automatically searches for Secabo Smart heat presses in the area. Please
make sure that Bluetooth is activated on your smartphone.
● Simply select the respective heat press from the list to connect to it. If you have changed
the Bluetooth PIN on the heat press, the app will prompt you to enter it in the app.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com
button for 2s, display flashes briefly, values are set to 0.
key on the controller
13