Page 1
Any type of reproduction of this operating manual requires the written permission of Secabo GmbH. Modifications to and errors in the technical data and/or product characteristics are reserved. Secabo GmbH accepts no liability for any direct or indirect damages resulting from the use of this product. Version 1.1 (29.07.2019)
The large opening angle allows for comfortable preparation of the transfer objects on the base plate. The TC1 is equipped with a work surface of 15cm x 15cm and a heat plate with a power consumption of 700W.
Machine description a. Heat plate b. Press lever c. Digital controller for temperature, time d. Power plug and power switch e. Base plate Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania mail@secabo.com www.secabo.com...
● No settings can be changed at the controller while a press operation is in progress. Note: Please keep in mind that it takes some time for the press to cool off after it is switched off. Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania mail@secabo.com www.secabo.com...
No guarantee can be derived from the recommended values. It is always the user's responsibility to determine and apply the correct settings for his specific conditions. Secabo GmbH Hochstatt 6-8 85283 Wolnzach Alemania mail@secabo.com www.secabo.com...
Need help?
Do you have a question about the TC1 and is the answer not in the manual?
Questions and answers