System Startup - Clevo NB55TK1 User Manual

System Startup

1. Remove all packing materials, and place the computer on a stable surface, and securely attach any peripherals you want to
use with the notebook (e.g. keyboard and mouse) to their ports.
2. When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the
battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the right of the computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter and leave it there for 6 seconds or longer.
• Remove the adapter cord from the computer's DC-In jack, and then plug it back in again; the battery will now be unlocked.
3. Use one hand to raise the lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees); use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
4.
Press the power button on the top of the computer for about 2 - 3 seconds to turn the computer "on" (note that the power
LED on the front of the computer will turn from orange to green when the computer powers on).
Figure 1 - 1 - Opening the Lid/LCD
130°
Quick Start Guide

Shutdown
Note that you should
always shut your com-
puter down by choos-
ing the Shut Down
command in Win-
dows (see page 1 -
33). This will help pre-
vent hard disk or sys-
tem problems.
System Startup 1 - 5
1